The minimum placement (measured from the underside of the top track) from the ceiling is 57 mm, to ensure that there is sufficient space to be able to hang in hang standards. 

The widths of the top tracks are designed to fit with standard section widths. Top Tracks are, however, able to be cut when designing a section which differs from the standard widths. Recommendation is to cut the joining top track on the left side in order to keep the end stop at the outer edges of the track. 

When cutting a top track; make sure to make the cut a minimum 3 mm from a bore hole or cut out on the upper side of the top track.

Maximum load per section is 240 kg. Do not store too much on each interior product and distribute the weight evenly across the system. Ensure the material and condition of the wall.

We recommended that the top track should be fastened to the wall with a screw in all holes in the top track.